Differences

This shows you the differences between two versions of the page.

--- filereference:output:receptors [2020/07/20 12:38] – created enviadmin
+++ filereference:output:receptors [2020/07/31 12:11] – added descriptions enviadmin
@@ Line 27: / Line 27: @@
 ===Atmosphere Data===
 |  |**Variable** |**Unit** |**Description** |
-|  |Date| - | Description |
+|  |Date| - | Simulation date |
-|  |Time| - | Description|
+|  |Time| - | Simulation time |
-|  |modtime| - | Description|
+|  |modtime| min | Minutes passed since the start of the simulation |
-|  |z| - | Description|
+|  |z| m | Height in metres |
-|  |u| - | Description|
+|  |u| m/s| Wind speed. Vector component along the West-East axis (+: East, -: West)|
-|  |v| - | Description|
+|  |v| m/s| Wind speed. Vector component along the North-South axis (+: South, -: North)|
-|  |w| - | Description |
+|  |w| m/s| Wind speed. Vector component along the vertical axis (+: up, -: down)|
-|  |wSpeed| - | Description|
+|  |wSpeed| m/s| Wind speed. Vector sum over all 3 axis|
-|  |wDir| - | Description|
+|  |wDir| deg | Wind direction of horizontal component in geographic reference (0: N..90:E..180:S etc)|
-|  |T| - | Description|
+|  |T| °C| Potential air temperature at reference (and model default) pressure. For the 3D model, it can be treated like the absolute air temperature|
-|  |dT/dt| - | Description|
+|  |dT/dt| K/h | Air temperature change between current and last time step|
-|  |q| - | Description|
+|  |q| g/kg| Specific air humidity|
-|  |q.rel| - | Description |
+|  |q.rel| %| Relative air humidity (Caution: Depends both on Specific air humidity and air temperature)|
-|  |Km.vert| - | Description|
+|  |Km.vert| - | Vertical exchange coefficient of the impulse|
-|  |Km.vert.rel| - | Description|
+|  |Km.vert.rel| - | Vertical exchange coefficient of the impulse normed with a neutral Km|
-|  |Km.hor| - | Description|
+|  |Km.hor| - | Horizontal exchange coefficient of the impulse|
-|  |E| - | Description|
+|  |E| m²/m³ | Local Turbulent Kinetic Energy|
-|  |Eps| - | Description|
+|  |Eps| m³/m³ | Local dissipation rate of Turbulent Kinetic Energy|
-|  |Tmrt| - | Description |
+|  |Tmrt| °C | The composed radiative fluxes and air temperature for a standing person|
-|  |Tleaf| - | Description|
+|  |LAD| m²/m³|	One-sided Leaf Area Density (Surface of leaf area per m³ air)|
-|  |Hleaf| - | Description|
+|  |Tleaf| °C | Leaf temperature, if no tree is in the cell, it is set to 0°C|
-|  |LEleaf| - | Description|
+|  |Hleaf| W/m² | Sensible heat from Leaf Area Unit if a plant is present|
-|  |Rs| - | Description|
+|  |LEleaf| W/m² | Latent heat from Leaf Area Unit if a plant is present|
-|  |CO2| - | Description|
+|  |Rs| s/m | Stomata resistance of leaves in grid box|
-|  |CO2.flx| - | Description|
+|  |CO2| mg/m³ | Locall CO2|
-|  |SW.dir| - | Description|
+|  |CO2.flx| mg/kg*s | Local CO2 flux at plants |
-|  |SW.dif| - | Description|
+|  |SW.dir| W/m²| Incoming direct shortwave radiation|
-|  |Press.p| - | Description|
+|  |SW.dif| W/m²| Incoming diffuse shortwave radiation|
-|  |Mass| - | Description|
+|  |Press.p| Pa | Pressure Perturbation - Dynamic pressure as a result of the wind field calculation. Pressure values will add up over time, use spatial difference values only if required|
-|  |E.mech| - | Description |
+|  |Mass| microgram/kg | Concentration of different species in air|
-|  |Rlw.warming| - | Description|
+|  |E.mech| m²/m³| Mechanic turbulent kinetic energy if in free atmosphere|
-|  |SVF.bldg| - | Description|
+|  |Rlw.warming| K/h | Temperature divergence due to longwave fluxes|
-|  |SVF.bldg+veg| - | Description|
+|  |SVF.bldg| - | Amount of only buildings that can be seen from the grid cell|
-|  |dT_CoolingSetpoint| - | Description|
+|  |SVF.bldg+veg| - | Amount of buildings and vegetation that can be seen from the grid cell|
-|  |CoolingHours| - | Description|
+|  |dT_CoolingSetpoint| K | Temperature difference to a cooling temperature of 26 °C|
-|  |dt_HeatingSetpoint| - | Description|
+|  |CoolingHours| h | Needed cooling hours to keep temperature below 26 °C|
-|  |HeatingHours| - | Description|
+|  |dT_HeatingSetpoint| K | Temperature difference to a heating temperature of 22 °C|
+|  |HeatingHours| Needed heating hours to keep temperature above 22 °C| Description|
 ===Surface/Flux Data===