This is an old revision of the document!
1D-Model Files
ENVI-met runs a one-dimensional model parallel to the main (3D) model in order to have produce different initial and boundary conditions.
The state of the 1D model is saved each time the main data of the model are saved. These files are written in simple ASCII format and you can find them in the \inflow folder.
(output folder)\Inflow\Inflow MySim <time> <date>.1D
What is in the files?
| NR | FIELD | UNIT | MEANING |
|---|---|---|---|
| 1 | z | m | |
| 2 | u | m/s | |
| 3 | v | m/s | |
| 4 | T | K | |
| 5 | q | g/kg | |
| 6 | Ri | ||
| 7 | Km | m2/s | |
| 8 | E | m2/s2 | |
| 9 | eps | m3/s2 | |
| 10 | E_prod | ||
| 11 | E_therm | ||
| 12 | E_trans | ||
| 13 | Km_limit | m2/s | |
| 14 | L_diag | m | |
| 15 | L_prog | m |