====== Output Files: Vegetation data (_VEG_) ====== [[filereference:output:start|← go back to Output File Index]], **See also:** () |Dimension|Nr Variables|Format | |3D| 30 |Binary (EDX/EDT) | **Vegetation Data** Contains the state of the vegetation for every simulation output in the context of the 3D main model. The vegetation data files are produced each main output interval (default: 60 min) and represent the general state of the vegetation at the given model time. ==== Variable list ==== This list represents the general variable structure. The actual sequence of the variables might differ but the same information is stored in total. | |**Variable** |**Unit** |**Description** | | |Objects| - | Description | | |Plant Index| - | Description| | |Plant Type ID| - | Description| | |Flow u| m/s| Description| | |Flow v| m/s| Description| | |Flow w| m/s| Description| | |Wind Speed at Vegetation| m/s| Description | | |Wind Speed Change at Vegetation| %| Description| | |Wind Direction at Vegetation| deg | Description| | |Local Drag at Vegetation| N/m³| Description| | |Horizontal Drag at Vegetation| N | Description| | |Horizontal Drag at Vegetation Vertical Sum| N | Description| | |Air Temperature at Vegetation| °C | Description | | |Spec. Humidity at Vegetation| g/kg| Description| | |Relative Humidity at Vegetation| %| Description| | |TKE at Vegetation| m²/m³| Description| | |Vegetation LAD| - | Description| | |Direct Sw Radiation| W/m²| Description| | |Diffuse Sw Radiation | W/m²| Description | | |Reflected Sw Radiation| W/m²| Description| | |Mean Radiant Temp.| °C| Description| | |Temperature Flux| K*m/s| Description| | |Vapour Flux| g/kg*m/s| Description| | |Water on Leafes| g/m²| Description| | |Leaf Temperature| °C | Description | | |Aerodynamic Resistance| s/m| Description| | |Stomata Resistance| s/m| Description| | |Plant CO2 Flux| mg/(m²*s)| Description| | |Plant Isoprene Flux| mg/cell*h| Description| | |PAR| micro mol m-2 s-1| Description|