C3. 1D-Model Files
see also: C1. Main Data Files, C2. Receptor Files, C4. climBOT Files
ENVI-met runs a one-dimensional model parallel to the main (3D) model in order to have produce different initial and boundary conditions.
The state of the 1D model is saved each time the main data of the model are saved. These files are written in simple ASCII format and you can find them in the \inflow folder.
4 (output folder)\Inflow\Inflow MySim <time> <date>.1D
What is in the files?
NR FIELD UNIT MEANING
1 z m Height of data
2 u m/s Wind speed u-component
3 v m/s Wind speed v-component
4 T K Air temperature
5 q g/kg Specific Humidity Air
6 Ri Richardson Number
7 Km m2/s Exchange Coefficient Impulse
8 E m2/s2 Turbulent Kinetic Energy
9 eps m3/s2 Dissipation of TKE
10 E_prod Production of E
11 E_therm Thermal E production
12 E_trans Transport of E
13 Km_limit m2/s Limit of Km if using E-eps model
14 L_diag m Mixing Length calculated using the diagnostic approach
15 l_prog m Mixing Length calculated from the E/eps data