====== Surface/Flux Receptor File: Data ====== This section describes the different data field found in the surface/flux receptor files. Only time series files will be produced for the surface data (see [[Receptor Files]]). **Data contained in the surface receptor files:** ^FIELD ^UNIT ^MEANING^ |Date |- |Date of the Model Time (String)| |Time |- |Model Time of Clock at Output (String)| |modTime |min |Model Time in min since Start| |z |m |Always zero, for compatibility with the other Receptor Files| |T0 |K |Surface Temperature| |dT0/dt |K/h |Change in Surface Temperature (see [[Remark 2|Remark 1]])| |q0 |g/kg |Surface Humidity| |uv1 |m/s |Horizontal Wind Speed above Surface| |w1 |m/s |Vertical Component Wind Speed above Surface (positive: upward)| |T1 |K |Air Temperature of Grid Point above the Surface| |H |W/m² |Sensible Heat Flux | |LE |W/m² |Latent Heat Flux| |G |W/m² |Soil Heat Flux, positive: directed into the soil | |Km |m²/s |Mass Exchange Coefficient at Surface | |Kh |m²/s |Turbulent Exchange Coefficient for Heat at Surface| |Qkw.Dir |W/m² |Max Direct Shortwave Radiation (see [[Remark 3|Remark 2]])| |Qkw.Dif |W/m² |Max Diffuse Shortwave Radiation | |Qlw.Budg |W/m² |Longwave Radiation Budget of Surface| |Qlw.Surf |W/m² |Longwave Emission of Surface| |Qlw.Sky |W/m² |Absorbed Longwave Radiation from the Sky (see [[Remark 1 flux|Remark 3]])| |Qlw.Leafs |W/m² |Absorbed Longwave Radiation from Vegetation (see [[Remark 1 flux|Remark 3]])| |Qlw.Envir |W/m² |Absorbed Longwave Radiation from Environment (Buildings)(see [[Remark 1 flux|Remark 3]])|